The Drop Pro 250 and Drop Pro 600 provide up to 36" of spread width in a drop pattern to keep the salt exactly where your vehicle drives.
These units can fit on most UTVs, compact tractors, or wheel loaders.
Capacity: 2.5 and 6.0 cu ft
Product #: NA
LOWEST SHIPPED PRICE IN THE COUNTRY
Place salt exactly where it's needed with the new line of stainless steel drop spreaders from SnowEx. The Drop Pro 250 and Drop Pro 600 provide up to 36" of spread width in a drop pattern to keep the salt exactly where your vehicle drives. And with three mounting systems, these units can fit on most UTVs, compact tractors, or wheel loaders to make quick work of sidewalks, walking paths, and other hard surfaces where truck equipment can't easily gain access.
Features
Fitted Lid with Rubber Straps
The material inside is protected by a custom-molded polyethylene lid that is secured by rubber straps.
Top Screen and Bag Splitter
The salt is loaded through and sifted by the 1/4" steel rod construction with grid top screen. A hinged bag splitter easily pulls up to open bagged rock salt for easy loading. When not needed, the bag splitter can be folded down and out of the way.
Easy-to Activate Baffles
A 36" spread width makes applications on sidewalks and walking paths easy. When you factor in a 6" salt leach after application, the SnowEx drop spreaders can treat these surfaces with one or two passes and limit damage to the grass or sensitive surfaces right next to the path. The spread width can be limited to 30" by activating 3" baffles on either side of the trough.
Free-Flowing Material Delivery System
The material delivery system uses proven paddle geometry and a new interference baffle to agitate the surrounding material with every revolution. This ensures a consistent amount of material flows into the spreader trough and, at the same time, keeps it from bridging.
Easy Clean Out
The entire trough drops open for easy and fast material clean-out when the job is done. Simply open a latch pin on the right and left sides, and the trough will swing backward to empty the hopper of its material. This allows you to store any leftover de-icing material in a dry, weather-resistant container until you need it for the next job.
Construction Built to Last
Laser-cut stainless steel and high strength rivets are used to construct the new DPS-250 and DPS-600. Oil filled poly bearings are used to provide a long, maintenance-free service life.
Variable Speed Control
Precisely match the weather conditions to the intended material delivery rate with enhanced speed control that includes a single variable-speed control knob to control the material flow rate.
Standard 2" Receiver Hitch
A detachable 2-inch receiver style mount is provided as a standard feature and includes all the necessary hardware to attach the spreader to the vehicle. This allows the spreaders to be mounted on various equipment; anything with a 2-inch hitch receiver with sufficient payload capacity for the selected spreader.
Standard 3-Point Mount
The 3-Point Mount includes all the pins needed for installation and is intended for compact tractors and articulating loaders. The spreaders have been designed to include attachment points and hardware that are compatible with a 3-point style implement hitch. This style of attachment is common on tractors but can also be found on some other types of equipment as well.
Standard In-Bed Mount
The spreaders were designed with in-bed mounting in mind where the units can sit flat and balanced. Brackets and ratchet tie down straps are included to establish correct positioning and to secure the unit in the bed of a UTV. This type of installation reduces stress on the equipment since the weight is positioned over the rear wheel as opposed to behind them and allows for additional versatility to maneuver in tight spaces.
Material Feed System
The Material Feed System saves time and material while minimizing turf damage, making it the ideal tool for maintaining sidewalks and other narrow areas. The precise material flow, up to 36" spreading width and unique drop ability allow you to place material exactly where it’s needed, preventing bounce and scatter into landscape beds. It also has a gateless design to prevent.
Accessories
Material Compatibility
Affordable financing programs for Western, Fisher SnowEx, SaltDogg and SnowWolf Snow Plows and Salt and Sand Spreaders, designed for In-State and Out-of-State residence.
Contact us for more information on all these finance options, 309-662-5344.
*Customer must be present in Bloomington, IL to complete financing and take delivery of Product.
90 Days Deferred Payment
COMMERCIAL PROGRAM DETAILS
CONSUMER PROGRAM DETAILS
Application for Credit
Local/In-State Residence
Please complete and submit the application online. Please click here.
After application is approved, must be able to provide a signiture in person at our location.
SnowEx Cuts Their Teeth As Contractors
The origins of SnowEx are very familiar to their customers. That's because they spent years as snow and ice fighters before becoming a manufacturer. They've done their share of all-nighters. They've dealt with those dreaded 3:00 a.m. equipment breakdowns. Simply put, they've walked in your boots. And that unique perspective goes into the development of every solution SnowEx offers.
History of Innovation
The history of the SnowEx is a long list of innovations. Low-maintenance motor / transmission drive systems, v-box spreaders with corrosion resistant poly hoppers, a wireless-controlled utility spreader, the job-tracking Salt-Traxx system for hopper spreaders. That's just the tip of the iceberg with what the've done... and what they will do... to give you more productive, longer lasting, easier to their equipment solutions.
Large Line of Snow & Ice Equipment
With a wide range of spreaders, sprayers, plows and other related tools to fight snow and ice, SnowEx not only offers equipment you need to do the job – they offer something that perfectly fits your unique operation.
Less is More
No engines. No pulleys. No sprockets. No belts. No chains. That's what you'll find (or, rather, won't find) on all SnowEx granular spreaders. Their electric drives combined with their patented auger systems feature much fewer moving parts than competitive spreaders, meaning much less that can go wrong when you're on the job.