LIFT GATES - Anthony RailTrac Meduim
back to top
Quality Features
Lifetime Warranted Slide Runners
Are uniquely designed and use-tested to guarantee consistent, trouble-free service. Anthonys slide runners feature one-piece, aluminum extrusion for superior performance - no plastic inserts to wear and replace. Dissimiliar metal slide channels (aluminum and steel) reduce friction and extend life.
ZLC™ Zero Leak Concept
Uses machined fittings, SAE "O" ring and JIC hydraulic connectins, along with factory installed -70 degrees low pour hydraulic fluid. The results is long, trouble-free service with no aggravating and costly leaks.
Closed Hydraulic System
Protects against outside dirt, grease, and moisture. The steel pump enclosure protects components from damage by impact, debris, and weather.
No Maintenance, Replaceable Bushings
Are used at sprockets to extend service life.
Large-Bore Double-Weight Hydraulic Cylinder
Allows the system to operate at lower pressure, increasing the service life of the system.
Positive Electrical Connections
Use heat-shrink siliconed wire terminals at all electrical connections to prevent electrical failure by sealing out moisture. Anti-Rotation terminals insure rugged circuit protection.
Marine-Duty Toggle Switch
Operates reliably under all types of weather conditions. Inside, heat-shrink siliconed wire connections seal out moisture, and stainless steel terminals provide extra corrosion protecion.
Standard Features back to top
Lockable Steel Power Unit Enclosure
Protects power from weather, theft, and vandalism.
Pressure Compensated Flow Valve
Provides constant and controlled lowering speed of the platform, loaded or unloaded.
Yellow Di-Chromate Plated Pivot Pins
Resist corrosion to increase service life.
Chrome Platd Piston Rod
Keeps exposed surface free of rust and contamination ot protect seals and extend cylinder life.
Relief Valve
Prevents overloading during lifting cycle.
Factory Installed Hydraulic Fluid
Prevents contamination during installation with proper hydraulic fluid.
Low Operating Pressure
Extends service life of power unit, hoses, cylinder seals and battery.
Spring-Assist Platform
Provides dual torsion springs for easy opening and closing, torsion bar on AR-2500.
Powder Coated Finish
Provides attractive, long-life protective finish.
Circuit Breaker
Protects truck wiring and power system in the event of a "dead short."
E-Z Mount Installation
Shipped completely pre-assembled for fast, clean, easy installation.
Exlusive 2 + 1 Warranty
2 years on mechanical components; 1 year on hydraulic system, parts and service.
Level Ride Platform
Maintains level ride with rear of truck.
Heavy Duty Roller Chain Drive
Provides long life with greater reliability than cable drive.
Available Models, Platforms and Capacities back to top
| Model | Lifting Capacity (lbs.) | Bed Height Min-Max |
Platform Load Area and Ramp | Shipping Weight (lbs.) |
| AR-1200-78 | 1,200 | 28"-52" | 74" x 36" + 6" | 687 |
| AR-1200-90 | 1,200 | 28"-52" | 86" x 36" + 6" | 731 |
| AR-1200-94 | 1,200 | 28"-52" | 90" x 36" + 6" | 772 |
| AR-1800-90 | 1,800 | 28"-52" | 86" x 36" + 6" | 748 |
| AR-1800-94 | 1,800 | 28"-58" | 90" x 36" + 6" | 771 |
| AR-1800-90-RT | 1,800 | 44"-58" | 86" x 42" + 6" | 812 |
| AR-1800-94-RT | 1,800 | 44"-58" | 90" x 42" + 6" | 835 |
| AR-2500-90 | 2,500 | 28"-58" | 86" x 42" + 6" | 779 |
| AR-2500-94 | 2,500 | 28"-58" | 90" x 42" + 6" | 803 |
| AR-2500-90-RT | 2,500 | 44"-58" | 86" x 42" + 6" | 843 |
| AR-2500-94-RT | 2,500 | 44"-58" | 90" x 42" + 6" | 884 |
| HCR-3000-90 | 3,000 | 28"-58" | 86" x 42" + 6" | 805 |
| HCR-3000-94 | 3,000 | 28"-58" | 90" x 42" + 6" | 829 |
back to top
Options
- Aluminum extruded platform
- 102" wide models
- Flush-mount control inside van
- Retention ramps-aluminum
- Hand-held control with plug and socket
- Auxiliary hand pump
- Above-bed-height models
- Custom platforms and applications
- Taillight kits
- Street-side control
- Cab or ignition cut-off switch
back to top
Mounting Requirements
